Latest News

Introducing the FM Series Heavy Duty Flow Switches

Suitable for the most arduous heavy-duty applications in industry and mining, the new FM series paddle
flow switches are built tough.  The entire switch body is CNC machined from solid aircraft grade
aluminium and 316 stainless steel.  The switch itself is superbly sensitive and it only requires
4 grams of force against its paddle to actuate its magnetically coupled switch.Two switches are
available in the FM range, a general purpose 5 to 500VAC SPDT or a 0 to 30VDC SPDT switch with gold
contacts for low wetting current applications.

Further information on the FM flow switches can be found by following this link: FM Paddle Flow Switch

Introducing the LM Series Heavy Duty Level Switches

A solid range of industrial and mining grade level switches suitable for tank level control in fully exposed
locations. The entire switch body of the LM level switch is CNC machined from solid aircraft grade aluminium
and 316 stainless steel. The switch itself is magnetically coupled to its float arm meaning there are no seals or
diaphragms to leak or fail within the switch.   Two switches are available in the LM range, a general purpose
5 to 500VAC SPDT or a 0 to 30VDC SPDT switch with gold contacts for low wetting current applications.

Further information on the FM flow switches can be found by following this link: LM Paddle Flow Switch

Introducing the TWM Series Trailing Wire Flow Switches.

Originally designed for mine dewatering applications the TWM series heavy duty trailing wire flow switches are
widely used in diverse applications ranging from gas fracking to dairy effluent pumping.   The TWM series switches
are built tough.  The entire switch body is CNC machined from solid aircraft grade aluminium and 316 stainless
steel.  The switch itself is superbly sensitive and it only requires 4 grams of force against its wire sensor to actuate
its magnetically coupled switch.  Two switches are available in the TWM range, a general purpose 5 to 500VAC
SPDT or a 0 to 30VDC SPDT switch with gold contacts for low wetting current applications.  The TWM trailing
wire switches are available to suit pipe sizes from 50mm (2”) upwards and can be supplied with a range of flexible
stainless wire sensors to suit specific applications.

Further information on the TWM Trailing Wire Flow switches can be found by following this link: TWM Trailing Wire

Introducing the New D40 Single Point Level Regulator.

The new Kelco D40 Single Point level Regulator is designed for precision level control in any application requiring
single point level monitoring.   For example, for high- or low-level alarms in risers and tanks.  Constructed from
CNC machined aircraft grade aluminium and featuring a seal-less magnetic coupling between its high compliance
switch and its actuating arm, the D40 is built solid for years of reliable service. The D40 overcomes the weaknesses
in traditional level switches by offering a sealed magnetically coupled switch and a float-less displacer rather than
a conventional ball float.  The D40 is available in two forms.  The standard switch, capable of directly controlling
pump motors up to 1.5kW 2HP or a low voltage version that has gold contacts for signalling and low wetting current
applications.

Further information on the D40 Level switch can be found by following
this link: D40 Level Switch

Introducing the New D50 Level Switch.

The new Kelco D50 level switch is a seriously robust piece of precision engineering.  Equally at home in heavy
industrial and mining application, the D50 can also be used for domestic and commercial tank level control.
The D50 overcomes all the weaknesses in traditional level switches and offers a sealed magnetically coupled
switch that can control the starting and stopping of a pump in tanks pits or wells.  The D50 is available in two
forms.  The standard switch, capable of directly controlling pump motors up to 1.5kW 2HP or a low voltage
version that has gold contacts for signalling and low wetting current applications.

Further information on the D50 Level switch can be found by following this link: D50 Level Switch

Introducing the F60 Mk2 Advanced Pump Controller.

The F60 Mk2 advanced pump controller is quite simply the most powerful and flexible pump controller we have
ever produced.  Capable of operating in one of five basic modes under pressure and flow control, the F60 Mk2
brings pump control to a whole new level of sophistication. Featuring more options and I/O than its predecessor,
the F60 Mk2 is very powerful yet very easy to set up and use.  
Further information on the F60 MK2 Advanced Pump Controller can be found by following
this link: F60 MK2 Advanced Pump Controller

Introducing the E30 Mk2 Pressure Switch.

The E30 Mk2 pressure switch evolved from the original E30. Featuring more I/O and multiple operating modes
the new E30 Mk2 can now operate two pumps simultaneously and function as a fully featured pressure based dual
pump controller.  In addition, the E30 Mk2 can operate as a precision loss of prime pressure switch with
anti-nuisance tripping timers and an operating range of 0 to 2000 kPa (0 to 290 psi).  Easy to program and install
the E30 Mk2 is the best pressure control for pumps we have ever produced. 

Further information on the E30 MK2 Pressure switch can be found by following this link: E30 MK2 Pressure Switch

Introducing the F29 Mk2 Time Delay Flow Switch.

Evolving from the original F29, the F29 Mk2 time delay flow switch has all the power and flexibility of the original
F29 with added I/O and even more features than its predecessor.  It takes time-based flow control to a whole new
level.  A veritable toolbox for the pump engineer, the F29 Mk2 is quite simply the most powerful time-based flow
switch we have ever produced.

Further information on the F29 MK2 Time Delay Flow switch can be found by following
this link: F29 MK2 Time Delay Flow Switch

Introducing the IPG20 Mk2 Intelligent Pump Guard.

The IPG20 Mk2 Intelligent Pump Guard is a specialist electronic pressure and flow-based pump controller
specifically designed to protect helical rotor and centrifugal pumps from running dry when used in dairy effluent
transfer and spraying applications.  Very simply to install and operate, the IPG20 offers more I/O and features
than the original IPG20.

Further information on the IPG20 MK2 Intelligent Pump Guard can be found by following
this link: IPG20 Intelligent Pump Guard

Paddle Trimming Calculator

We have added a new easy to use paddle trimming calculator to our website.
Previous versions of this calculator were Microsoft Excel based.
The new calculator can be found here: Calculator

Adobe Reader download

  • Download Adobe Reader:
For downloading and reading PDF documents, Adobe reader is required
Download Adobe Reader Here

 

KU Series Level Switch

Features

  • Robust double molded construction
  • Polyurethane 3 core cable
  • Polypropylene housing
  • Low switching differential (75MM)
  • All direction tilt action
  • Stable repeatable switching
  • Compact size 75mm diameter
  • Optional cable weight available

DESCRIPTION

This product is not suitable for Water or Sewerage applications

The KU series level regulator is a compact three-wire switch specifically designed for single point level control in oils. Its ability to withstand oils makes it suitable for level control in diesel fuel tanks and in applications involving bulk diesel or oil. The KU series level regulator will provide a stable switching action with a high degree of repeatability.

MORE INFORMATION

 

K Series Level Regulator

Features

  • Australian made
  • Low differential switching
  • All direction tilting action
  • S.P.D.T 3 wire switching action
  • Polypropylene, CPE and Santoprene construction
  • Wide range of cable lengths available
  • Stable repeatable switching action
  • No Mercury or lead components
  • Compact size, 75mm diameter
  •  Optional cable weight available

Description

The K series heavy duty level regulator is a compact three-wire float switch for highly accurate and repeatable single point level sensing and control applications. It is ideal for use in water, sea water and most acids and alkali solutions.  It will provide a stable switching action with a very high degree of reliability. The teardrop shape of the float makes it ideal for effluent and sewerage usage, as the float cell has no shoulders or edges for solids to build on. These float switches can be reliably and safely used in potable water systems, as they do not contain hazardous materials such as mercury or lead.

Applications

  • Basic liquid level control
  • Multi point level control
  • Sewerage level control
  • Chemical level control
  • High and low level alarms
  • Self powered signalling
  • Pump protection

More Information

AutoCAD Drawing

Related Products

 

Q Series Float Switch

Features

  • Australian made
  • Extra strong polypropylene float
  • S.P.D.T three wire switch
  • No mercury or lead components
  • High quality CPE rubber cable
  • No corrodible metal parts
  • Sealed tamper proof design
  • Highly chemical resistant
  • Wide range of cable lengths available

Description

The Q Series Float Switch consists of a heavy duty polypropylene float double molded onto a high quality three
core cable. The float contains a single pole double throw switch, which can be used to give adjustable control
over the level of liquid in tanks, pits and dams. By careful tethering of the cable the switch can be set to give an
ON or Off action at any desired position. The heavy duty switch can directly control small pump motors, and is
also ideal for instrument or PLC signalling.

Applications

  • High and low level control in tanks, pits and dams
  • Loss of prime protection for pumps
  • Automatic control of sump pumps
  • Control of tank filling and draining valves
  • Control of levels in effluent and separation pits
  • Level control in bulk liquid tanks
  • Control of level warning equipment

More Information

Cad Drawings

Related Products


Header Text