Below is a list of some of our now obsolete Kelco Engineering products and their replacements. If you are looking to replace a switch not listed here, please contact us via sales@kelco.com.au or call us at (02) 9905 6425 and our friendly staff will be able to assist you.

• The F26 – F21 – F20  switches have been replaced by the F Series and the FM Series.
• The TW26 – TW21 – TW20 Trailing Wire  switches have been replaced by the TW Series and TWM Series.
• The F25-B – F25-C – F25-R Paddle Flow Switches have been replacement by our F Series. Please see the Series data sheet for more information
• Similarly, we no longer manufacture the TW25 Series. The current replacement is the TW Series

• The CR20 has been replaced by the CR22. The CR22 is only suitable for vertical mounting. Please see the data sheet here
• The UB25 Series  is now only available with a stainless steel body
• The C25 Series  and  C15 Series  are now only available with a brass body

• The L26 – L21 – L20  have been replaced by the L Series and LM Series.
• The L25-B and L25-C  have been replaced by the L-L-25B but please note that you must check the electrical specs on the L Series data sheet.
• The D30  has been replaced by the D50 Two Level Displacer Switch. Please check the D50 data sheet and installation guide to check if the switch is a suitable replacement for your application.
• We no longer manufacture the ‘L’ low voltage model in the D40 and D50 Series

• The F40 & F50  have been replaced by the F60-MK3 Pump Controller
• The F27 – F28 – F30  have been replaced by the F29-MK3 Programmable Flow Switch
• The E10 & E20  have been replaced by the E30-MK2 Pressure Switch
• The PG20  has been replaced by the IPG20-MK3 Intelligent Pump Guard