F60 MK3Controllore digitale per pompe

Il massimo in termini di versatilità e flessibilità nel controllo delle pompe — semplice da usare e molto potente. Monitora pressione e flusso del sistema per garantire la completa protezione della pompa, con cinque modalità di funzionamento per sistemi a pompa singola o doppia.

Caratteristiche

Molto semplice da programmare
Funzionamento multitensione
Visualizza la pressione e i valori di soglia
15 temporizzatori programmabili integrati
Potente uscita a stato solido da 40 A
Relè d’allarme dedicato
Custodia elettrica staccabile
Pressione nominale 20 bar (290 psi)
Adatto a tubi da 25 mm (1") e più grandi
Accetta un ingresso remoto
Custodia resistente agli agenti atmosferici

Il controllore digitale per pompe F60 MK3 è disponibile in versione interamente termoplastica con attacco al processo da 1" BSP. Il controllore standard funziona a 220–240 V AC o a 24 V AC/DC; è disponibile anche un modello dedicato a 12 V DC.

Ulteriori informazioni

Scheda tecnica F60 MK3(versione in inglese)
Guida all’installazione e alla programmazione F60 MK3(versione in inglese)
Download disegno 3D F60 MK3 (file .stl)

Opzione filo

Questo controllore può usare un filo al posto della paletta. Ordini F60-MK3 / F60-MK3-12 insieme a un kit braccio a filo Serie TW (TW-ARM-KIT-[lunghezza]): sono due articoli separati.

Il kit è fornito sciolto e lo monta il Suo installatore. Kelco non monta i kit e non fornisce unità già montate. Le istruzioni di montaggio vengono inviate via e-mail con il preventivo.

Lunghezze del kit: 50, 80, 100, 140, 160, 180, 200, 250 e 300 mm. Per altre lunghezze scriva a [email protected].

Trova i kit nei ricambi. Verifichi la lunghezza per il Suo tubo nel Calcolatore della paletta.

Ordini — modelli disponibili

Codice modello	Descrizione
F60-MK3	Standard model — 220–240 V AC and 24 V AC or 24 V DC operation
F60-MK3-12	Low-voltage model — 12 V DC operation only

Limiti di funzionamento

Ambient temperature range	1 °C to 50 °C
Liquid temperature range	1 °C to 60 °C
Ingress protection rating	IP64
Maximum operating pressure (static or dynamic)	20 bar / 290 psi
Minimum burst pressure	> 25 bar / 360 psi
Starting pressure range	0 to 2000 kPa or 0 to 290 psi in steps of 1 kPa or 1 psi
Stopping pressure range	0 to 2000 kPa or 0 to 290 psi in steps of 1 kPa or 1 psi
Minimum pressure differential (on-to-off, off-to-on)	1 kPa or 1 psi
Recommended pipe size	25 mm / 1" or larger (no upper limit)

Dati elettrici

Supply voltage (standard model)	220–250 V AC or 18–25 V AC/DC (multi-voltage input)
Supply voltage (12 V DC model)	11–14 V DC (65 mA current draw)
Maximum motor load (all models)	Single-phase motors up to 2.4 kW max at 240 V AC (P1). 3-phase motors of all sizes via a suitable interposing contactor — no maximum motor size applies when using an interposing contactor.
Relay 1 normally-open contact rating (HD terminal not in use)	10 A at 240 V AC resistive
Relay 1 normally-closed contact rating	3.5 A at 240 V AC resistive
Relay 2 normally-open contacts	3.5 A at 240 V AC resistive

Funzioni

# = impostabile dall’utente

#Select pressure units (kPa or psi)	—
#Pre-start delay timer	All modes. Adjustable from 1 second to 18 hours in 1-second increments.
#Start-up timer	All modes. Adjustable from 1 second to 15 minutes in 1-second increments.
#Pressure rise timer	Mode 4 only. Allows time for the pressure to rise. Adjustable from 1 second to 15 minutes in 1-second increments.
#Run-on timer	All modes. Adjustable from 1 second to 15 minutes in 1-second increments.
#Pressure dip timer	Mode 4 only. Adjustable from 1 second to 4 minutes in 1-second increments.
#Delayed restarting timer	Modes 1–3 only. Adjustable from 1 minute to 99 hours 59 minutes in 1-minute increments.
#Starting pressure	0 to 2000 kPa or 0 to 290 psi in 1 kPa or 1 psi steps.
#Stopping pressure	0 to 2000 kPa or 0 to 290 psi in 1 kPa or 1 psi steps.
#Cyclic running and stopping timers	All modes. Running and stopping times both adjustable from 2 minutes to 99 hours 59 minutes in 1-minute increments.
#Auto restart if run dry	All modes. Single or repeatable tries. Adjustable from 1 minute to 99 hours 59 minutes in 1-minute increments.
#Anti-cycling	Modes 1–3 only. Adjustable from 1 motor start per hour to 1800 motor starts per hour.
#Burst pipe detection	Mode 3 only. Adjustable from 1 minute to 99 hours 59 minutes in 1-minute increments.
#Leak detector	—
#Dual pump control with or without dual flow sensing	—
#Starts the pump at a preset low pressure	—
#Stops the pump at a preset high pressure	—
Stops the pump if flow stops	Loss-of-prime protection for the pump(s).
Displays system pressure in preferred units	—
Displays high & low pressure set points	—
Remote start	Can start the pump using an external switch.
Flow-only start/stop	Starts and stops the pump on flow regardless of pressure.
Pump run-time display	Displays the total time the pump ran in minutes.
Fault diagnostic display	On a fault, displays the reason the pump was shut down.
Remote stop	Remote stop via an external switch opening its contacts — stops the pump if flow stops.

Dimensioni

5 Operating Modes

The F60 MK3 includes 5 unique operating modes, each combining a different subset of the available timers and pressure-control functions. Different modes suit pressure-only, flow-only, dual-sensor, and dual-pump scenarios. The full mode × function matrix is set out in the printed data sheet PDF available below.

Flow Sensitivity & Paddle Trimming

Like the F29, the F60 MK3 uses a mechanical paddle to detect flow. The flow rate at which the paddle activates depends on pipe size, fluid viscosity, turbulence, and the trimmed paddle length. For an accurate estimate of activation flow and to determine how much to trim the paddle for your application, use the online Paddle Calculator.

Open the Paddle Calculator →

3-Phase Pump Motors

The F60 MK3 can be used to control either single-phase or 3-phase pumps, provided a 220–240 V AC or 24 V AC supply is available at the installation site. For 3-phase motors the F60 drives an interposing contactor — use the Pump Controller Power Calculator to size the contactor and verify cable rating and voltage drop.

Open the Pump Controller Power Calculator →

Hazardous Areas

The F60 MK3 is not certified for use in hazardous areas and must not be installed in any area classified as hazardous under AS/NZS 60079.10 (Zone 0, 1, 2, 20, 21 or 22).

Manutenibilità

Il controllore digitale per pompe F60 MK3 non è riparabile dall’utente. Sono comunque disponibili ricambi presso Kelco Engineering o il Suo distributore.

Altri prodotti in Controllori per pompe

E30 MK2

Controllore digitale di pressione

F29 MK3

Flussostati programmabili

IPG20 MK3

Protezione intelligente per pompe