F60 MK3Controlador de bomba digital

O máximo em controle de bomba versátil e flexível — simples de usar e muito potente. Monitora a pressão e o fluxo do sistema para garantir proteção completa da bomba, com cinco modos de operação para sistemas de uma ou duas bombas.

Início › Produtos › Controladores de bomba › F60 MK3
F60 MK3

Recursos

  • Muito simples de programar
  • Operação em múltiplas tensões
  • Exibe pressão e set points
  • 15 temporizadores programáveis integrados
  • Drive de estado sólido potente de 40 A
  • Relé de alarme dedicado
  • Carcaça elétrica removível
  • Pressão nominal 20 bar (290 psi)
  • Adequado para tubulações de 25 mm (1") e maiores
  • Aceita entrada remota
  • Carcaça à prova de intempéries

O controlador de bomba digital F60 MK3 está disponível em construção totalmente termoplástica com conexão de processo 1" BSP. O controlador padrão opera em 220–240 V CA ou em 24 V CA/CC; um modelo dedicado 12 V CC também está disponível.

Opção de fio (trailing wire)

Este controlador pode usar um fio (trailing wire) no lugar da palheta. Peça o F60-MK3 / F60-MK3-12 junto com um kit de braço com fio da Série TW (TW-ARM-KIT-[comprimento]): são dois itens separados.

O kit é fornecido solto e o seu instalador faz a montagem. A Kelco não monta kits nem fornece unidades montadas. As instruções de montagem são enviadas por e-mail com o seu orçamento.

Comprimentos do kit: 50, 80, 100, 140, 160, 180, 200, 250 e 300 mm. Para qualquer outro comprimento, escreva para [email protected].

Encontre os kits em Peças de reposição. Verifique o comprimento para o seu tubo na Calculadora de palheta.

Selecionar modelo

Pedido — Modelos disponíveis

ModeloDescrição
F60-MK3Standard model — 220–240 V AC and 24 V AC or 24 V DC operation
F60-MK3-12Low-voltage model — 12 V DC operation only

Limites de operação

Ambient temperature range1 °C to 50 °C
Liquid temperature range1 °C to 60 °C
Ingress protection ratingIP64
Maximum operating pressure (static or dynamic)20 bar / 290 psi
Minimum burst pressure> 25 bar / 360 psi
Starting pressure range0 to 2000 kPa or 0 to 290 psi in steps of 1 kPa or 1 psi
Stopping pressure range0 to 2000 kPa or 0 to 290 psi in steps of 1 kPa or 1 psi
Minimum pressure differential (on-to-off, off-to-on)1 kPa or 1 psi
Recommended pipe size25 mm / 1" or larger (no upper limit)

Dados elétricos

Supply voltage (standard model)220–250 V AC or 18–25 V AC/DC (multi-voltage input)
Supply voltage (12 V DC model)11–14 V DC (65 mA current draw)
Maximum motor load (all models)Single-phase motors up to 2.4 kW max at 240 V AC (P1). 3-phase motors of all sizes via a suitable interposing contactor — no maximum motor size applies when using an interposing contactor.
Relay 1 normally-open contact rating (HD terminal not in use)10 A at 240 V AC resistive
Relay 1 normally-closed contact rating3.5 A at 240 V AC resistive
Relay 2 normally-open contacts3.5 A at 240 V AC resistive

Funções

# = ajustável pelo usuário

#Select pressure units (kPa or psi)—
#Pre-start delay timerAll modes. Adjustable from 1 second to 18 hours in 1-second increments.
#Start-up timerAll modes. Adjustable from 1 second to 15 minutes in 1-second increments.
#Pressure rise timerMode 4 only. Allows time for the pressure to rise. Adjustable from 1 second to 15 minutes in 1-second increments.
#Run-on timerAll modes. Adjustable from 1 second to 15 minutes in 1-second increments.
#Pressure dip timerMode 4 only. Adjustable from 1 second to 4 minutes in 1-second increments.
#Delayed restarting timerModes 1–3 only. Adjustable from 1 minute to 99 hours 59 minutes in 1-minute increments.
#Starting pressure0 to 2000 kPa or 0 to 290 psi in 1 kPa or 1 psi steps.
#Stopping pressure0 to 2000 kPa or 0 to 290 psi in 1 kPa or 1 psi steps.
#Cyclic running and stopping timersAll modes. Running and stopping times both adjustable from 2 minutes to 99 hours 59 minutes in 1-minute increments.
#Auto restart if run dryAll modes. Single or repeatable tries. Adjustable from 1 minute to 99 hours 59 minutes in 1-minute increments.
#Anti-cyclingModes 1–3 only. Adjustable from 1 motor start per hour to 1800 motor starts per hour.
#Burst pipe detectionMode 3 only. Adjustable from 1 minute to 99 hours 59 minutes in 1-minute increments.
#Leak detector—
#Dual pump control with or without dual flow sensing—
#Starts the pump at a preset low pressure—
#Stops the pump at a preset high pressure—
Stops the pump if flow stopsLoss-of-prime protection for the pump(s).
Displays system pressure in preferred units—
Displays high & low pressure set points—
Remote startCan start the pump using an external switch.
Flow-only start/stopStarts and stops the pump on flow regardless of pressure.
Pump run-time displayDisplays the total time the pump ran in minutes.
Fault diagnostic displayOn a fault, displays the reason the pump was shut down.
Remote stopRemote stop via an external switch opening its contacts — stops the pump if flow stops.

Dimensões

Dimensões F60 MK3
Three views with key dimensions (mm). 1" BSPT thread connection; paddle is cut to suit application; three M20 cable glands; removable protective cap.

5 Operating Modes

The F60 MK3 includes 5 unique operating modes, each combining a different subset of the available timers and pressure-control functions. Different modes suit pressure-only, flow-only, dual-sensor, and dual-pump scenarios. The full mode × function matrix is set out in the printed data sheet PDF available below.

Flow Sensitivity & Paddle Trimming

Like the F29, the F60 MK3 uses a mechanical paddle to detect flow. The flow rate at which the paddle activates depends on pipe size, fluid viscosity, turbulence, and the trimmed paddle length. For an accurate estimate of activation flow and to determine how much to trim the paddle for your application, use the online Paddle Calculator.

Open the Paddle Calculator →

3-Phase Pump Motors

The F60 MK3 can be used to control either single-phase or 3-phase pumps, provided a 220–240 V AC or 24 V AC supply is available at the installation site. For 3-phase motors the F60 drives an interposing contactor — use the Pump Controller Power Calculator to size the contactor and verify cable rating and voltage drop.

Open the Pump Controller Power Calculator →

Hazardous Areas

The F60 MK3 is not certified for use in hazardous areas and must not be installed in any area classified as hazardous under AS/NZS 60079.10 (Zone 0, 1, 2, 20, 21 or 22).

Manutenção

O controlador de bomba digital F60 MK3 não está sujeito a manutenção pelo usuário. No entanto, peças de reposição estão disponíveis na Kelco Engineering ou no seu distribuidor.

Mais opções em Controladores de bomba

E30 MK2

E30 MK2

Controlador de pressão digital

F29 MK3

F29 MK3

Chaves de fluxo programáveis

IPG20 MK3

IPG20 MK3

Proteção inteligente de bomba