Seri KUSakelar Pelampung untuk Diesel & Oli
Varian Seri K yang tahan solar dan oli: pelampung miring 75 mm yang ringkas dan sama, tetapi dengan kabel poliuretan oranye yang dibuat untuk kontrol level titik tunggal pada oli. TIDAK cocok untuk aplikasi air atau air limbah.

Fitur
- Untuk aplikasi solar dan oli (bukan air atau air limbah)
- Konstruksi double moulded yang kokoh
- Kabel 3 inti poliuretan oranye
- Bodi polipropilena
- Diferensial penyakelaran rendah
- Aksi miring ke segala arah
- Penyakelaran stabil dan berulang
- Ukuran ringkas, diameter 75 mm
- Tersedia pemberat kabel opsional
- Panjang kabel 1–20 m (1 / 4 / 6 / 10 / 20 m)
- Kedalaman rendam maksimum 30 m, suhu cairan maksimum 60 °C
Seri KU menggunakan pelampung miring 45° yang sama dengan Seri K, tetapi dengan kabel poliuretan oranye tiga inti (H05BQ-F) yang dibuat khusus. Sakelar pelampung tiga kawat yang ringkas ini dirancang untuk kontrol level titik tunggal pada oli, dan ketahanannya terhadap oli membuatnya cocok untuk kontrol level pada tangki bahan bakar solar serta aplikasi yang melibatkan solar atau oli dalam jumlah besar. Bola berat yang diseimbangkan pada lengan penggerak sakelar presisi tinggi bergeser menjauhi sumbu sakelar saat pelampung miring, sehingga pelampung hanya perlu miring 45° ke arah mana pun agar sakelar bekerja. Pelampung polipropilena dengan ruang double-moulded yang tertutup rapat secara hermetis dan penghalang double-moulded dari polipropilena padat yang menyegel lubang masuk kabel; arus beban dibatasi hingga 6 A oleh kabel 0.75 mm². Demi keselamatan, operasikan hanya pada tegangan rendah (12–48 V AC atau DC).
Informasi Lainnya
Lembar data lokal belum tersedia untuk produk ini dalam bahasa yang Anda pilih. Tautan di bawah membuka versi bahasa Inggris.
Pilih Model
Pemesanan: Model yang Tersedia
Batas Operasi
Data Listrik
Dimensi

Diesel & Oil Service Only
The KU is built specifically for oil and diesel service — the polyurethane cable resists swelling, hardening and cracking in diesel and oil. It is intended for use in oil and diesel applications only and is NOT suitable for use in water or sewage applications; use a K Series for those.
Typical Applications
Diesel fuel and oil tanks; high and low level alarms; alarms, pump control (direct or through a contactor or relay), and PLC / BMS inputs.
Safety — Low Voltage Only
In the interests of safety the KU Series should only ever be used with control voltages in the range of 12 to 48 volts AC or DC. All electrical work must be carried out by a qualified, licensed electrician in line with AS/NZS (or equivalent) standards and local wiring rules.
Hazardous Areas
The KU Series is not certified for use in hazardous areas and must not be installed in any area classified as hazardous under AS/NZS 60079.10 (Zone 0, 1, 2, 20, 21 or 22).
Operating Environment
Do not use the KU in closed vessels above 300 kPa static pressure or in submerged applications deeper than 30 m. Do not expose it to liquid temperatures below -20 °C or above 60 °C; the switch and cable will withstand temperatures outside these limits but service life may be reduced. In liquids of low specific gravity the buoyancy of the float is reduced and a proportionally higher operating differential results.
Mounting and Wiring
Avoid turbulence and any place where the float or cable will abrade against tank walls, piping or pumps, and keep the cables of adjoining switches from rubbing or tangling. Suspend the switch at least 100 mm away from tank walls and stand pipes. Never tie the float against a pipe or the side of the tank: it must be free to tilt and return to vertical. Keep exposed cable out of direct sunlight: terminate it in a junction box or run it in conduit rather than draping it over the tank rim. With the float hanging vertically the core colours are blue (common), black (normally closed) and brown (normally open); when the level rises and tilts the float 45°, blue to brown closes and blue to black opens. Most installations use only the blue common and one other wire; the unused wire is live when the switch actuates and must always be isolated. Two float switches controlling the high and low levels of a tank or pit normally use a latching circuit, for pumping out of or into the tank.
Cable Properties
H05BQ-F 3G0.75 mm² (KEMA-KEUR) cable: three cores of 22/0.2 mm copper, EPR insulation (2.4 ± 0.1 mm), core colours blue, brown and black, orange thermoplastic polyurethane (TMPU) outer sheath (RAL 2003), 7.25 ± 0.2 mm diameter, voltage rating 300/500 V, test voltage 2000 V / 2500 V, temperature range -50 °C to +90 °C fixed installation and -40 °C to +80 °C in motion, maximum conductor temperature 90 °C (200 °C short circuit), abrasion, cut and tear resistant, flexible at low temperatures, conductor resistance 26.0 Ω/km max. per core at 20 °C, cable current rating 6 A max. (cable limited), maximum suspended length approx. 50 m (cable only). Cable lengths available: 1, 4, 6, 10 and 20 m. The cable is also described as polyester-based, halogen-free, with high flexural fatigue strength, and resistant to oils, fats and mild acids.
Kemudahan Servis
Unit tertutup, bagian dalamnya tidak dapat diservis oleh pengguna. Kabel cadangan tersedia dari Kelco Engineering atau distributor Anda.


